Allis Chalmers 8070
| | 1982 - 1985 |
| Row-Crop tractor |
|
Series map:
8050
8070
169.3hp*
189.7hp*
*Estimated engine power for comparison only.
| Production |
| Manufacturer | Allis Chalmers
|
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Total built | 2,354
|
| Original price | $60,337
|
| Mechanical |
| Two- or four-wheel drive |
| Differential lock | electro-hydraulic rear
|
| Steering | hydrostatic power
|
| Differential hydraulic wet discs brakes |
| Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
| Capacity |
| Fuel | 60 gal 227.1 L
|
|   | 25 gal (optional tank) 94.6 L
|
| Rear diff. | 68.4 qts 64.7 L
|
| Hydraulics |
| Type | closed-center load-sensitive
|
| Valves | 2 or 3
|
| Pump flow | 22 gpm 83.3 lpm
|
|   | 13.5 gpm (transmission) 51.1 lpm
|
| Total flow | 45 gpm 170.3 lpm
|
| Steering flow | 9.5 gpm 36.0 lpm
|
| Tractor hitch |
| Rear Type | III/II
|
| Rear lift (at 24"/610mm) | 8,200 lbs 3719 kg
|
| Power Take-off (PTO) |
| Rear PTO | independent
|
| Rear PTO Type | 1000
|
| 8070 Serial Number Location |
 |
| Serial number decal on the left side of the tractor's frame, just ahead of the fuel tank. Serial number also stamped into the casting at the rear of the tractor, above and to the left of the PTO shaft. |
| Electrical |
| Charging system | alternator
|
| Charging amps | 100
|
| Battery volts | 12
|
| References |
 |
| 8070 - 8050 - 8030 - 8010 published in 1983, by Allis Chalmers |
| Agri-Data System published in 1982, by Allis Chalmers |
| Page information |
 |
| Copyright 2025 TractorData.com® |
| Email me: Peter@TractorData.com |
| TractorData is a family-owned small business located in Minnesota. I have been researching tractor history and providing specifications for free since 1999. |
| Peter Easterlund - owner/author |
| This machine's data modified on December 12, 2025 |
©2000-2025 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.