Deutz-Allis 8070
| | 1985 - 1988 |
| Row-Crop tractor |
|
Note: the Deutz-Allis model 8070 is the same as the Allis Chalmers 8070. The following data is from the 8070 listing. |
| Production |
| Manufacturer: | Deutz-Allis
|
| Type: | Row-Crop tractor
|
| Factory: | West Allis, Wisconsin, USA
|
| Total built: | 2,354
|
| Original price: | $60,337
|
| Deutz-Allis 8070 Power |
| Drawbar (tested): | 145.36 hp
108.4 kW
|
| PTO (tested): | 170.72 hp
127.3 kW
|
| power test details ... |
| Mechanical |
| Chassis: | 4x2 2WD
|
| | 4x4 MFWD 4WD (optional)
|
| Differential lock: | foot-button
|
| Steering: | hydrostatic power
|
| Brakes: | differential hydraulic wet discs
|
| Cab: | Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.
|
| Transmissions: | 20-speed partial power shift
|
| | 12-speed Allis-Chalmers
|
 Transmission details ... |
| Photos |
| No photos of the Deutz-Allis 8070 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
| Capacity |
| Fuel: | 60 gal
227.1 L
|
| | 25 gal
94.6 L (optional tank)
|
| Rear diff.: | 68.4 qts
64.7 L
|
| Hydraulics |
| Type: | closed-center load-sensitive
|
| Valves: | 2 or 3
|
| Pump flow: | 22 gpm
83.3 lpm
|
| | 13.5 gpm
51.1 lpm (transmission)
|
| Total flow: | 45 gpm
170.3 lpm
|
| Steering flow: | 9.5 gpm
36.0 lpm
|
| Tractor hitch |
| Rear Type: | III/II
|
| Rear lift (at 24"/610mm): | 8,200 lbs
3719 kg
|
| Power Take-off (PTO) |
| Rear PTO: | independent
|
| Rear RPM: | 1000
|
| Electrical |
| Charging system: | alternator
|
| Charging amps: | 100
|
| Battery volts: | 12
|
| Page information |
| Last update: | February 28, 2011
|
| Copyright: | Copyright 2021 TractorData LLC
|
| Contact: | Peter@TractorData.com
|
©2000-2021 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.
Engine details ...
Full dimensions and tires ...