Allis Chalmers 8050
| | 1982 - 1985 |
| 8000 Series | | Row-Crop tractor |
|
Series map:
8030
8050
8070
148.6hp
169.3hp
189.7hp
| Production |
| Manufacturer | Allis Chalmers
|
| Row-Crop tractor |
| Built in West Allis, Wisconsin, USA |
| Total built | 2,336
|
| Original price | $58,411
|
| Mechanical |
| Two- or four-wheel drive |
| Differential lock | foot-button
|
| Steering | hydrostatic power
|
| Differential hydraulic wet discs brakes |
| Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player. |
| Capacity |
| Fuel | 60 gal
227.1 L
|
| | 25 gal (optional tank)
94.6 L
|
| Rear diff. | 66.8 qts
63.2 L
|
| Hydraulics |
| Type | closed-center load-sensitive
|
| Valves | 2 or 3
|
| Pump flow | 22 gpm
83.3 lpm
|
| | 13.5 gpm (transmission)
51.1 lpm
|
| Total flow | 45 gpm
170.3 lpm
|
| Steering flow | 9.5 gpm
36.0 lpm
|
| Tractor hitch |
| Rear Type | III/II
|
| Rear lift (at 24"/610mm) | 6680 lbs
3030 kg
|
| | 8200 lbsOptOptional
3719 kg
|
| Power Take-off (PTO) |
| Rear PTO | independent
|
| Rear RPM | 540/1000
|
| | 1000 OptOptional
|
| Electrical |
| Charging system | alternator
|
| Charging amps | 100
|
| Battery volts | 12
|
| References |
 |
| 8070 - 8050 - 8030 - 8010 published in 1983, by Allis Chalmers |
| Agri-Data System published in 1982, by Allis Chalmers |
| Page information |
| Contact: Peter Easterlund |
| Updated on March 6, 2020 |
| Copyright 2022 TractorData LLC |
©2000-2022 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.
Engine details ...
Transmission details ...
Performance test details ...
Full dimensions and tires ...