International Harvester 268 Hydro
| 1977 - 1984 |
Industrial tractor |
|
Production |
Manufacturer | International Harvester
|
Type | Industrial tractor
|
International Harvester 268 Hydro Power |
Engine (gross) | 80 hp 59.7 kW
|
Engine (net) | 77.4 hp 57.7 kW
|
Mechanical |
Chassis | 4x2 2WD
|
Differential lock | mechanical rear
|
Steering | power
|
Brakes | hydraulic wet disc
|
Cab | Open operator station. Cab optional with available heater.
|
Photos |
No photos of the International Harvester 268 Hydro are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Hydraulics |
Type | open center
|
Pressure | 2500 psi 172.4 bar
|
Pump flow | 12.9 gpm 48.8 lpm
|
Tractor hitch |
Rear Type | II
|
Control | position and draft control
|
Rear lift (at ends) | 4400 lbs 1995 kg
|
  | 5250 lbsOptOptional 2381 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Clutch | 127mm hydraulic wet disc
|
Rear RPM | 540 (1.375)
|
Engine RPM | 540@2112
|
268 Hydro Serial Numbers |
Location: | Serial number plate on the right side of the tractor frame, above the front axle.
|
Electrical |
Ground | negative
|
Charging system | alternator
|
Charging amps | 45
|
Battery volts | 12
|
Battery AH | 95
|
References |
 |
268 published by International Harvester |
Page information |
Contact: Peter Easterlund |
Updated on December 29, 2021 |
Copyright 2021 TractorData LLC |
©2000-2021 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.