- information on all makes and models of tractors
Tractors > New Holland > TS115A

New Holland TS115A

New Holland TS115A tractor photo
2003 - 2006   TS-A Series
Utility tractor
Series next:New Holland TS125A
Series back:New Holland TS100A



Manufacturer:New Holland
Factory:Basildon, England

New Holland TS115A Engine:

   New Holland 6.7L 6-cyl diesel
full engine details ...


Fuel:52.5 gal [198.7 L]

3-Point Hitch:

Rear Type:II
 IIIN/II*Category 3 hitch available with electronic draft control
Control:mechanical lower link draft sensing
 electronic draft control*Optional
Rear lift (at 24"/610mm):4,200 lbs [1905 kg]
 6,210 lbs [2816 kg] *With single assist ram
 8,240 lbs [3737 kg] *With two assist rams
 8,598 lbs [3900 kg] *With two assist rams and electronic draft control.

Power Take-off (PTO):

Rear PTO:independent
Clutch:electro-hydraulic wet disc
Rear RPM:540/1000

Dimensions & Tires:

2WD Wheelbase:104.4 inches [265 cm]
4WD Wheelbase:104.7 inches [265 cm]
Weight:10,449 lbs [4739 kg]
full dimensions and tires ...

New Holland TS115A attachments:

 front-end loader
all TS115A attachments ...

TS115A Serial Numbers:

how to read serial numbers...


New Holland TS115A Power:

Engine:115 hp [85.8 kW]
PTO (claimed):95 hp [70.8 kW]


Chassis:4x2 2WD
 4x4 MFWD 4WD
Brakes:hydraulic wet disc
Cab:Two-post foldable ROPS. Cab available with air-conditioning.


 closed load sensing optional
Pressure:2500 psi [172.4 bar]
 2700 psi [186.2 bar] (open center)
Valves:2 to 4
Pump flow:9.3 gpm [35.2 lpm]
 17.4 gpm [65.9 lpm] (optional pump)
 20 gpm [75.7 lpm] (closed center)
Steering flow:9.1 gpm [34.4 lpm]
Steering press.:2500 psi [172.4 bar]


Charging system:alternator
Charging amps:100


 2 (optional)
Cold-cranking amps:800

Page information:

Last update:April 18, 2018
Copyright:Copyright 2018 TractorData LLC
©2000-2018 - TractorData™. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.