- information on all makes and models of tractors
Tractors > Deutz-Allis > 8050

Deutz-Allis 8050

Deutz-Allis 8050 tractor photo
1985 - 1988
Row-Crop tractor
Previous model:Allis Chalmers 8050
Next model:Deutz-Allis 9150
Series next:Deutz-Allis 8070
Series back:Deutz-Allis 8030

Note: the Deutz-Allis model 8050 is the same as the Allis Chalmers 8050. The following data is from the 8050 listing.


Factory:West Allis, Wisconsin, USA
Total built:2,336
Original price (USD):$58,411

Deutz-Allis 8050 Engine:

   Allis Chalmers 7.0L 6-cyl diesel
full engine details ...


Fuel:60 gal [227.1 L]
 25 gal [94.6 L] (optional tank)
Rear diff.:66.8 qts [63.2 L]

3-Point Hitch:

Rear Type:III/II
Rear lift (at 24"/610mm):6680 lbs [3030 kg]
 8200 lbs [3719 kg] *Optional

Power Take-off (PTO):

Rear PTO:independent
Rear RPM:540/1000

Dimensions & Tires:

2WD Wheelbase:106 inches [269 cm]
4WD Wheelbase:96 inches [243 cm]
Weight:15305 to 19380 pounds
Front tire:10.00-16
Rear tire:18.4-38
full dimensions and tires ...

8050 Serial Numbers:

Location:Above PTO shield
1981: 1001
1982: 1016
1983: 1924
1984: 2496
1985: 3187
Final: 3336

how to read serial numbers...


Deutz-Allis 8050 Power:

Drawbar (tested):131.44 hp [98.0 kW]
PTO (tested):152.40 hp [113.6 kW]
power test details ...


Chassis:4x2 2WD
 4x4 MFWD 4WD
Differential lock:foot-button
Steering:hydrostatic power
Brakes:differential hydraulic wet discs
Cab:Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.


Type:closed-center load-sensitive
Valves:2 or 3
Pump flow:22 gpm [83.3 lpm]
 13.5 gpm [51.1 lpm] (transmission)
Total flow:45 gpm [170.3 lpm]
Steering flow:9.5 gpm [36.0 lpm]


Charging system:alternator
Charging amps:100



Page information:

Last update:February 28, 2011
Copyright:Copyright 2016 TractorData LLC
©2000-2016 - TractorData™. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.