John Deere 4210 Transmission

John Deere 4210 tractor photo
2002 - 2004
4000 Ten Compact Series
Compact Utility tractor
Transmissions overview
9-speed partially synchronized
Type:partially synchronized
Gears:9 forward and 3 reverse
Oil capacity:25.2 qts
23.8 L
Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges.
With 12.4-16 rear tires.
4210 SyncShift partially synchronized speeds
Gears:infinite (3-range) forward and reverse
Oil capacity:27.2 qts
25.7 L
Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow.
With 12.4-16 rear tires.
4210 eHydro hydrostatic speeds
John Deere 4210 eHydro transmission photo
Page information
Last update:July 17, 2015
Copyright:Copyright 2021 TractorData LLC
©2000-2021 -®. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.