John Deere 4310 Transmission
|
|
| Transmissions overview | |
| 9-speed partially synchronized | |
| hydrostatic | |
| 12-speed power shuttle |
| Transmission | |
| Transmission: | SyncShift |
| Type: | partially synchronized |
| Gears: | 9 forward and 3 reverse |
| Oil capacity: | 25.2 qts 23.8 L |
| Three gears (1-3) plus reverse in three ranges (A-C). Gears can be shifted on the move using the clutch. Tractor must be stopped to shift ranges. | |
| Speeds | |
| With 11.2-24 rear tires. | |
|
| Transmission | |
| Transmission: | eHydro |
| Type: | hydrostatic |
| Gears: | infinite (3-range) forward and reverse |
| Oil capacity: | 27.2 qts 25.7 L |
| Three-range hydrostatic transmission with foot pedals and cruise control. Tractor must be stopped to shift ranges. Automotive cruise control option allows set speed to be adjusted with rocker switch. SpeedMatch option allows a maximum speed to be set and full pedal travel used to achive that speed. LoadMatch option prevents the tractor from stalling during heavy loads. The MotionMatch option enables the acceleration rate to be set to fast or slow. | |
| Speeds | |
| With 11.2-24 rear tires. | |
|
| Transmission | |
| Transmission: | ePowrReverser |
| Type: | power shuttle |
| Gears: | 12 forward and reverse |
| Oil capacity: | 25.2 qts 23.8 L |
| Four gears (1-4) in three ranges (A-C) with reverser lever. Gears are synchronized and may be shifted on the move using the clutch. Tractor must be stopped to shift ranges. Forward/reverse direction changes may be done on the move, without the clutch, by using the reverser lever. | |
| Speeds | |
| With 11.2-24 rear tires. | |
|
| Page information | |
| Last update: | May 6, 2021 |
| Copyright: | Copyright 2021 TractorData LLC |
| Contact: | Peter@TractorData.com |