John Deere 420 Attachments


John Deere 420 lawn tractor photo
1983 - 1991
400 Series
Garden tractor
400
Series:420430
445
Attachment overview
50" mid-mount mower deck
60" mid-mount mower deck
Snowblower
Blade
Front-end loader
A rear-mounted finish mower was available for the 420 if the tractor was equipped with 2000 RPM rear PTO and a three-point hitch.
Garden tractors are capable of using tillers, plows, or other ground-engaging attachments. TractorData does not list details of these attachments.
50" Mower deck
John Deere M01012
50 inches
127 cm
Total width: 68 inches
172 cm
3-blade
hydraulic lift
right-discharge
Cut height: 1.5 to 6 inch
3 to 15 cm
226 lbs
102 kg
Belt: shaft-drive
60" Mower deck
John Deere
60 inches
152 cm
Total width: 72.5 inches
184 cm
3-blade
hydraulic lift
right-discharge
Cut height: 2 to 7 inch
5 to 17 cm
367 lbs
166 kg
Belt: shaft-drive
54" Blade
John Deere 0042M
front-mount
54 inches width
137 cm
18 inches height
45 cm
12 inches lift
30 cm
3.5 inches cut
8 cm
184 lbs
83 kg
hydraulic-lift
hydraulic-angle
46" Snow blower
John Deere 0062M
46 inches width
116 cm
two-stage
Clear height:12 inches
30 cm
front-mount
hydraulic-lift
310 lbs
140 kg
47" Snow blower
John Deere 47 2752M
47 inches width
119 cm
dual-stage
Clear height:23 inches
58 cm
front-mount
hydraulic-lift
400 lbs
181 kg
John Deere 44 Loader
Loader weight500 lbs
226 kg
Height (to pin)73 inches
185 cm
Clearance, dumped bucket53.25 inches
135 cm
Dump reach22 inches
55 cm
Dump angle50°
Reach at ground43.75 inches
111 cm
Rollback angle20°
Breakout force (bucket)725 lbs
328 kg
Lift to full height (at pin)500 lbs
226 kg
Bucket capacity0.21 cu yd
0.2 cu m
 0.24 cu yd
0.2 cu m
Bucket width45,54 inches
11567 cm
Page information
Contact: Peter Easterlund
Updated on January 14, 2021
Copyright 2021 TractorData LLC
©2000-2021 - TractorData™. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.