| Production | |
| Manufacturer | Fendt (a part of AGCO) | 
| Row-Crop tractor | |
| Fendt 724 Vario Engine | |
| AGCO Power 7.5L 6-cyl diesel | |
| Fuel tank | 118.8 gal 449.7 L  | 
| Exhaust fluid (DEF) | 12.7 gal 48.1 L  | 
| Fendt 724 Vario Transmission | |
| continuously-variable transmission | |
| Fendt 724 Vario Power | |
| Engine (gross) | 240 hp 179.0 kW  | 
| Mechanical | |
| Four-wheel drive | |
| Cab standard with air-conditioning. | 
| Photos | |
| No photos of the Fendt 724 Vario are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. | |
| Hydraulics | |
| Type | load-sensing variable displacement | 
| Pressure | 2901 psi 200.0 bar  | 
| Rear valves | 4 or 5 | 
| Mid valves | 2 or 3 | 
| Front valves | 1 or 2 | 
| Pump flow | 43.6 gpm 165.0 lpm  | 
|   | 58.1 gpmOptOptional 219.9 lpm  | 
| SCV flow | 31.7 gpm (UDK) 120.0 lpm  | 
|   | 44.9 gpm (DUDK) 169.9 lpm  | 
| Tractor hitch | |
| Rear lift | 24840 lbs (max force) 11267 kg  | 
| Front Hitch | II | 
| Front lift | 7328 lbs 3323 kg  | 
| Power Take-off (PTO) | |
| Rear PTO | independent | 
| Rear PTO Type | 540/540E/1000/1000E | 
| Engine RPM | 540@1618 | 
|   | 540E@1283 | 
|   | 1000@1649 | 
|   | 1000E@1308 | 
| Front PTO | independent OptOptional | 
| Front PTO Type | 1000 | 
| Engine RPM | 1000@1647 | 
| Dimensions & Tires | |
| Wheelbase | 114.2 inches 290 cm  | 
| Weight | 20393 lbs 9250 kg  | 
| Front tire | 540/65R30 | 
| Rear tire | 650/65R42 | 
| Electrical | |
| Ground | negative | 
| Charging system | alternator | 
| Charging amps | 240 | 
| Charging volts | 14 | 
| Battery volts | 12 | 
| Battery AH | 180 | 
| References | |
![]()  | |
| 700 Vario Gen7 published in 2022, by Fendt | 
| Page information | |
![]()  | |
| Copyright 2024 TractorData.com® | |
| TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
| Peter Easterlund - owner/author | |
| Email: Peter@TractorData.com | |
| Updated on September 1, 2022 |