Fendt 943 Vario MT
|
|
| Series: | 940 Vario MT ← | 943 Vario MT |
| Production | |
| Manufacturer: | Fendt (a part of AGCO) |
| Type: | Agricultural Crawler tractor |
| Factory: | Jackson, Minnesota, USA |
| Fendt 943 Vario MT Power | |
| Engine (gross): | 425.1 hp 317.0 kW |
| Fendt 943 Vario MT Engine | |
| AGCO Power 9.8L 7-cyl diesel | |
 Engine details ... |
| Mechanical | |
| Chassis: | crawler |
| Cab: | Cab standard with air-conditioning. |
| Transmission: | continuously-variable transmission |
 Transmission details ... | |
| Photos | |
| No photos of the Fendt 943 Vario MT are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. | |
| Capacity | |
| Fuel: | 180 gal 681.3 L |
| 215 gal 813.8 L *Optional | |
| 257 gal 972.7 L *Optional | |
| Exhaust fluid (DEF): | 18.8 gal 71.2 L |
| Hydraulic system: | 33 gal 124.9 L |
| Hydraulics | |
| Type: | closed center |
| Capacity: | 33 gal 124.9 L |
| Pressure: | 2900 psi 200.0 bar |
| Valves: | 4 to 6 |
| Pump flow: | 58 gpm 219.5 lpm |
| 116 gpm 439.1 lpm *Optional combined flow of dual pumps. | |
| SCV flow: | 37 gpm 140.0 lpm |
| 45 gpm 170.3 lpm *Optional, with 0.625 or 0.75 inch couplers. | |
| Tractor hitch | |
| Rear Type: | IVN/III |
| Control: | position and draft control |
| Rear lift (at ends): | 19000 lbs 8618 kg |
| Rear lift (at 24"/610mm): | 16500 lbs 7484 kg |
| Drawbar: | Cat. 4 |
| Power Take-off (PTO) | |
| Rear PTO: | independent |
| Rear RPM: | 1000/1000E (1.75) |
| Engine RPM: | 1000@1650 1000E@1225 |
| Dimensions & Tracks | |
| Wheelbase: | 101 inches 256 cm |
| Weight: | 33443 to 33667 pounds |
| 14-inch tracks | |
 Full dimensions and tracks ... | |
| Electrical | |
| Ground: | negative |
| Charging system: | alternator |
| Charging amps: | 300*Dual 150A alternators. |
| Batteries: | 2 |
| Battery volts: | 12 |
| Battery AH: | 185 |
| Page information | |
| Last update: | July 8, 2021 |
| Copyright: | Copyright 2021 TractorData LLC |
| Contact: | Peter@TractorData.com |