| Production | |
| Manufacturer | Zetor |
| Built in Brno, Czech Republic | |
| Zetor 11050 Engine | |
| Zetor 4.2L 4-cyl diesel | |
| Mech shuttle Fuel tank | 40 gal 151.4 L |
| Power shuttle Fuel tank | 48 gal 181.7 L |
| Zetor 11050 Transmissions | |
| 16-speed two-speed power shift | |
| 24-speed three-speed power shift | |
| Zetor 11050 Power | |
| Engine (gross) | 107 hp 79.8 kW |
| Engine (net) | 101 hp 75.3 kW |
| PTO (claimed) | 94 hp 70.1 kW |
| Mechanical | |
| Four-wheel drive | |
| Differential lock | mechanical rear |
|   | limited-slip front |
| Power steering | |
| Hydraulic wet disc brakes | |
| Cab standard with air-condtioning. | |
| Photos | |
| No photos of the Zetor 11050 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. | |
| Hydraulics | |
| Type | open center |
| Pressure | 2900 psi 200.0 bar |
| Valves | 3 |
| SCV flow | 14 gpm 53.0 lpm |
| Total flow | 20 gpm 75.7 lpm |
| Steering flow | 6 gpm 22.7 lpm |
| Tractor hitch | |
| Rear Type | II/I |
| Control | position and draft control |
| Rear lift (at ends) | 7600 lbs 3447 kg |
|   | 9150 lbsOptOptional 4150 kg |
| Power Take-off (PTO) | |
| Rear PTO | independent |
| Clutch | electro-hydraulic wet disc |
| Rear PTO Type | 540/1000 (1.375) |
| Dimensions & Tires | |
| Mech shuttle Wheelbase | 92 inches 233 cm |
| Power shuttle Wheelbase | 96 inches 243 cm |
| Weight | 8600 to 9030 pounds |
| Front tire | 13.6R24 |
| Rear tire | 18.4R34 |
| Zetor 11050 attachments | |
| front-end loader | |
| Electrical | |
| Ground | negative |
| Charging system | alternator |
| Charging amps | 95 |
| Charging volts | 12 |
| Battery CCA | 950 |
| Battery volts | 12 |
| Page information | |
![]() | |
| Copyright 2024 TractorData.com® | |
| TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
| Peter Easterlund - owner/author | |
| Email: Peter@TractorData.com | |
| Updated on February 24, 2017 |