Production | |
Manufacturer | Challenger (a part of AGCO) |
Utility tractor | |
Built in France |
Variants | |
6715S | similar Massey Ferguson model |
Challenger MT485E Engine | |
AGCO Power 4.9L 4-cyl diesel | |
Fuel tank | 67 gal 253.6 L |
Exhaust fluid (DEF) | 7.9 gal 29.9 L |
Engine details ... |
Challenger MT485E Transmissions | |
16-speed four-speed power shift | |
24-speed six-speed power shift | |
continuously-variable transmission | |
Transmission details ... |
Challenger MT485E Power | |
Engine | 140 hp 104.4 kW |
PTO (claimed) | 130 hp 96.9 kW |
Drawbar (tested) | 124.6 hp 92.9 kW |
PTO (tested) | 144 hp 107.4 kW |
Performance test details ... |
Mechanical | |
Four-wheel drive | |
Differential lock | electro-hydraulic front and rear |
Power steering | |
Hydraulic wet disc brakes | |
Cab standard with air-conditioning. Auto-Guide 3000 ((Optional)) |
Photos | |
No photos of the Challenger MT485E are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Hydraulics | |
Type | open center |
Valves | up to 5 |
Pump flow | 26 gpm 98.4 lpm |
  | 29 gpmOptOptional 109.8 lpm |
  | 50 gpmOptOptional 189.2 lpm |
Tractor hitch | |
Rear Type | III/II |
Rear lift (at 24"/610mm) | 11244 lbs 5100 kg |
Rear Arms | telescopic link end |
Power Take-off (PTO) | |
Rear PTO | independent |
Rear PTO Type | 540/1000 |
  | 540/540E/1000/1000E |
Dimensions & Tires | |
Wheelbase | 105 inches 266 cm |
Weight | 15432 lbs 6999 kg |
Full dimensions and tires ... |
Electrical | |
Ground | negative |
Charging system | alternator |
Charging amps | 175 |
  | 240 *Total charging capacity with optional twin 120A system. |
Battery volts | 12 |
References | |
MT400E Series Tractors published in 2016, by AGCO |
Page information | |
Copyright 2024 TractorData.com® | |
TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
Peter Easterlund - owner/author | |
Email: Peter@TractorData.com | |
Updated on October 20, 2022 |