Farmall 400 Hi-Clear
| | 1954 - 1956 |
| High-Clearance tractor |
|
| Production |
| Manufacturer: | Farmall (a part of International Harvester)
|
| Type: | High-Clearance tractor
|
| Factory: | Rock Island, Illinois, USA
|
| Farmall 400 Hi-Clear Power |
| Drawbar (claimed): | 37 hp
27.6 kW
|
| PTO (claimed): | 45 hp
33.6 kW
|
| Mechanical |
| Chassis: | 4x2 2WD
|
| Steering: | manual
|
| | power optional
|
| Brakes: | manual disc
|
| Cab: | Open operator station.
|
| Transmission: | 10-speed partial power shift
|
 Transmission details ... |
| Capacity |
| Fuel: | 21.5 gal
81.4 L
|
| Aux. fuel: | 0.9 gal
3.4 L
|
| Hydraulic system: | 3.5 gal
13.2 L
|
| | 3.63 gal
13.7 L (power steering)
|
| Rear hubs: | 3 qts
2.8 L (each)
|
| Hydraulics |
| Type: | Hydra-Touch
|
| Capacity: | 3.5 gal
13.2 L
|
| | 3.63 gal
13.7 L (power steering)
|
| Valves: | 3
|
| Tractor hitch |
| Type: | IH Fast Hitch (optional)
|
| Power Take-off (PTO) |
| Rear PTO: | transmission
|
| | independent (optional)
|
| Rear RPM: | 540
|
| Engine RPM: | 537@1450 (trans.)
534@1450 (ind.)
|
| Belt Pulley |
| Diameter: | 11 inches
27 cm
|
| Width: | 7.5 inches
19 cm
|
| RPM: | 899
|
| Speed: | 2,588 ft/min
788.82 meters/min
|
| Electrical |
| Ground: | positive (6V)
|
| | negative (12V)
|
| Charging system: | generator
|
| Battery volts: | 6 (gas)
|
| | 12 (diesel)
|
| Page information |
| Last update: | June 16, 2016
|
| Copyright: | Copyright 2021 TractorData LLC
|
| Contact: | Peter@TractorData.com
|
©2000-2021 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.
Engine details ...
Full dimensions and tires ...