Deutz-Allis 8010
| 1985 - 1988 |
Row-Crop tractor |
|
Note: the Deutz-Allis model 8010 is the same as the Allis Chalmers 8010. The following data is from the 8010 listing. |
Production |
Manufacturer: | Deutz-Allis
|
Type: | Row-Crop tractor
|
Factory: | West Allis, Wisconsin, USA
|
Total built: | 1,832
|
Original price: | $46,176
|
Deutz-Allis 8010 Power |
Drawbar (tested): | 91.46 hp 68.2 kW
|
PTO (tested): | 107.38 hp 80.1 kW
|
power test details ... |
Mechanical |
Chassis: | 4x2 2WD
|
| 4x4 MFWD 4WD (optional)
|
Differential lock: | foot-button
|
Steering: | hydrostatic power
|
Brakes: | differential hydraulic wet discs
|
Cab: | Acousta cab standard with heat and air-conditioning. Optional radio and cassette tape player.
|
Transmissions: | 16-speed partial power shift
|
| 20-speed partial power shift
|
| 12-speed Allis-Chalmers
|
Transmission details ... |
Capacity |
Fuel: | 60 gal 227.1 L
|
| 25 gal 94.6 L (optional tank)
|
Rear diff.: | 66.8 qts 63.2 L
|
Hydraulics |
Type: | load-sensitive
|
Valves: | 2 or 3
|
Pump flow: | 22 gpm 83.3 lpm
|
| 13.5 gpm 51.1 lpm (transmission)
|
Total flow: | 45 gpm 170.3 lpm
|
Steering flow: | 9.5 gpm 36.0 lpm
|
Tractor hitch |
Rear Type: | II
|
Rear lift (at 24"/610mm): | 6,680 lbs 3030 kg
|
Power Take-off (PTO) |
Rear PTO: | independent
|
Rear RPM: | 540/1000
|
Electrical |
Charging system: | alternator
|
Charging amps: | 100
|
Battery volts: | 12
|
Page information |
Last update: | January 31, 2011
|
Copyright: | Copyright 2021 TractorData LLC
|
Contact: | Peter@TractorData.com
|
©2000-2021 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.