| | Production: |
| Manufacturer: | CaseIH
|
| Factory: | Jesi, Italy
|
| | |
| FPT 4.5L 4-cyl diesel |
| full engine details ... | | | Capacity: |
| Fuel: | 33.5 gal [126.8 L]
|
| | |
| Rear Type: | 2
|
| Control: | mechanical lower-link draft control, optional electronic draft control (EDC)
|
| Rear lift (at 24"/610mm): | 5,745 lbs [2605 kg]
|
| | 6,445 lbs [2923 kg] (EDC)
|
| | |
| Rear PTO: | independent
|
| Rear RPMs: | 540/1000
|
| | |
| Wheelbase: | 92.2 inches [234 cm] (2WD)
|
| | 92.5 inches [234 cm] (4WD)
|
| Weight: | 7.275 to 7936 pounds
|
| full dimensions and tires ... | | | |
| front-end loader |
| all Farmall 95U attachments ... | | | Farmall 95U Serial Numbers: |
- Serial numbers unknown -
|
|
|
|
| | CaseIH Farmall 95U Power: |
| Engine (gross): | 95 hp [70.8 kW]
|
| PTO (claimed): | 80 hp [59.7 kW]
|
| Drawbar (tested): | 72.0 hp [53.7 kW]
|
| PTO (tested): | 87.2 hp [65.0 kW]
|
| power test details ... | | | Mechanical: |
| Chassis: | 4x2 2WD
|
| | 4x4 MFWD 4WD (optional)
|
| Steering: | hydrostatic power
|
| Brakes: | hydraulic wet disc
|
| Cab: | Straddle deck platform with ROPS
|
| | cab optional
|
| | Hydraulics: |
| Type: | open center
|
| Valves: | 2 rear, 1 mid (optional)
|
| Pump flow: | 16.1 gpm [60.9 lpm]
|
| Total flow: | 26.5 gpm [100.3 lpm]
|
| Steering flow: | 10.4 gpm [39.4 lpm]
|
| | Electrical: |
| Ground: | negative
|
| Charging system: | alternator
|
| Charging amps: | 120
|
| | Battery: |
| Number: | 1
|
| Cold-cranking amps: | 960
|
| Volts: | 12
|
| | Page information: |
| Last update: | March 5, 2012
|
| Copyright: | Copyright 2012 TractorData LLC
|
| Contact: | Peter@TractorData.com
|
|
