| | Production: |
| Distributor: | CaseIH
|
| Manufacturer: | Shibaura
|
| Factory: | Dublin, Georgia, USA
|
| | |
| Shibaura 2.2L 4-cyl diesel |
| full engine details ... | | | Capacity: |
| Fuel: | 13 gal [49.2 L]
|
| | |
| Rear Type: | I
|
| Control: | position control
|
| Rear lift (at 24"/610mm): | 2,330 lbs [1056 kg]
|
| | 2,800 lbs [1270 kg] (CVT)
|
| | |
| Rear PTO: | independent
|
| Rear RPMs: | 540
|
| Mid PTO: | optional with hydro/CVT
|
| Mid RPMs: | 2000
|
| | |
| Wheelbase: | 73.5 inches [186 cm]
|
| Weight: | 3454 to 4491 pounds
|
| Front tire: | 8-16
|
| Rear tire: | 14.9-24
|
| full dimensions and tires ... | | | |
| front-end loader |
| all Farmall 45 attachments ... | | | Farmall 45 Serial Numbers: |
- Serial numbers unknown -
|
|
|
|
| | CaseIH Farmall 45 Power: |
| Engine (gross): | 45 hp [33.6 kW]
|
| PTO (claimed): | 39.6 hp [29.5 kW] (gear)
|
| | 37.8 hp [28.2 kW] (hydro)
|
| | 36 hp [26.8 kW] (CVT)
|
| | Mechanical: |
| Chassis: | 4x4 MFWD 4WD
|
| Steering: | hydrostatic power
|
| Brakes: | wet disc
|
| Cab: | Two-post foldable ROPS. Cab optional with air-conditioning.
|
| | Hydraulics: |
| Type: | open center
|
| Pump flow: | 9.8 gpm [37.1 lpm]
|
| Total flow: | 14.9 gpm [56.4 lpm]
|
| Steering flow: | 5.1 gpm [19.3 lpm]
|
| | Electrical: |
| Ground: | negative
|
| Charging system: | alternator
|
| Charging amps: | 40 (ROPS)
|
| | 55 (cab)
|
| | 75 (cab optional)
|
| | Battery: |
| Number: | 1
|
| Cold-cranking amps: | 600
|
| Volts: | 12
|
| | Page information: |
| Last update: | October 9, 2011
|
| Copyright: | Copyright 2012 TractorData LLC
|
| Contact: | Peter@TractorData.com
|
|
