| Engine options | |
| John Deere 6.2L 2-cyl gasoline | |
| John Deere 6.8L 2-cyl all-fuel | |
| John Deere 6.2L 2-cyl LP gas | |
| John Deere 6.2L 2-cyl diesel |
| Engine Detail | |
| John Deere | |
| gasoline | |
| 2-cylinder 4-valve | |
| liquid-cooled | |
| Displacement | 379.5 ci 6.2 L |
| Bore/Stroke | 5.875x7.00 inches 149 x 178 mm |
| Air cleaner | oil bath |
| Compression | 6.15:1 |
| Rated RPM | 975 |
| Firing order | 1-2 |
| Starter volts | 12 |
| Coolant capacity | 34 qts 32.2 L |
| Engine Detail | |
| John Deere | |
| all-fuel | |
| 2-cylinder | |
| liquid-cooled | |
| Displacement | 412.5 ci 6.8 L |
| Bore/Stroke | 6.125x7.00 inches 156 x 178 mm |
| Compression | 4.6:1 |
| Rated RPM | 975 |
| Firing order | 1-2 |
| Starter volts | 12 |
| Engine Detail | |
| John Deere | |
| LP gas | |
| 2-cylinder | |
| liquid-cooled | |
| Displacement | 379.5 ci 6.2 L |
| Bore/Stroke | 5.875x7.00 inches 149 x 178 mm |
| Compression | 7.3:1 |
| Rated RPM | 975 |
| Firing order | 1-2 |
| Starter volts | 12 |
| Engine Detail | |
| John Deere | |
| diesel | |
| 2-cylinder | |
| liquid-cooled | |
| The diesel engine on the model 70 used a 18.85 cubic inch 4-cylinder starting engine. | |
| Displacement | 375.6 ci 6.2 L |
| Bore/Stroke | 6.125x6.375 inches 156 x 162 mm |
| Compression | 16:1 |
| Rated RPM | 1125 |
| Firing order | 1-2 |
| Starter | Gasoline pony engine |
| Starter volts | -unknown- |
| Oil capacity | 12 qts 11.4 L |
| Coolant capacity | 28 qts 26.5 L |
| Page information | |
![]() | |
| Copyright 2024 TractorData.com® | |
| TractorData is a family-owned small business located in Minnesota that has been providing reference information on tractors since 1999. | |
| Peter Easterlund - owner/author | |
| Email: Peter@TractorData.com | |
| Updated on August 11, 2023 |