J.I. Case 530 CK Construction King
| 1960 - 1967 |
Industrial tractor |
|
Series: | 530 CK Construction King |
| 580 CK ↓ |
Production |
Manufacturer | J.I. Case
|
Type | Industrial tractor
|
Factories | Racine, Wisconsin, USA
|
  | Burlington, Iowa, USA
|
Original price | Open operator station.
|
The Case 530 Construction King was based on the Case model 530 tractor. It was available as a bare tractor, loader tractor, or with loader and backhoe. The tractor chassis was built in Racine while the loader and backhoe were built in Burlington. |
J.I. Case 530 CK Power |
Engine | 48 hp 35.8 kW
|
Mechanical |
Chassis | 4x2 2WD
|
Steering | hydrostatic power
|
Brakes | differential manual disc/band
|
Capacity |
Fuel | 22 gal 83.3 L
|
Hydraulic system | 4 gal (tractor) 15.1 L
|
  | 5.5 gal (loader) 20.8 L
|
  | 11 gal (loader-backhoe) 41.6 L
|
Hydraulics |
Type | optional
|
Capacity | 4 gal (tractor) 15.1 L
|
  | 5.5 gal (loader) 20.8 L
|
  | 11 gal (loader-backhoe) 41.6 L
|
Pressure | 2000 psi 137.9 bar
|
Valves | 2 (optional)
|
Total flow | 22 gpm (2100rpm) 83.3 lpm
|
  | 20 gpm (1900rpm) 75.7 lpm
|
Tractor hitch |
Rear Type | I (optional)
|
Power Take-off (PTO) |
Rear PTO | independent (optional)
|
Rear RPM | 540
|
Electrical |
Ground | positive
|
Charging system | generator
|
Batteries | 1 (gas)
|
  | 2 (diesel)
|
Battery volts | 12 (gas)
|
  | 6 (diesel)
|
References |
 |
530CK Wheel Tractor Operator's Manual (9-1235) published by J.I. Case |
Page information |
Contact: Peter Easterlund |
Updated on January 20, 2022 |
Copyright 2022 TractorData LLC |
©2000-2022 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.