Challenger 1046
| 2017 - 2021 |
1000 Series | Row-Crop tractor |
|
Series map:
1042
1046
1050
435.0hp
476.0hp
517.0hp
Production |
Manufacturer | Challenger (a part of AGCO)
|
Row-Crop tractor |
Built in Marktoberdoft, Germany |
Original price was $418,820 in 2019 |
Challenger 1046 Power |
Engine (gross) | 476 hp 355.0 kW
|
PTO (claimed) | 421 hp 313.9 kW
|
Drawbar (tested) | 382.7 hp 285.4 kW
|
PTO (tested) | 443.0 hp 330.3 kW
|
Performance test details ... |
Mechanical |
Four-wheel drive |
Power steering |
Hydraulic wet disc brakes |
Cab standard with air-conditioning. Auto-Guide; AccuField Command; AgControl |
Photos |
No photos of the Challenger 1046 are currently available. To submit yours, email it to Peter@TractorData.com. Photos may only be used with the permission of the original photographer. |
Hydraulics |
Type | load-sensing
|
Valves | up to 6
|
Pump flow | 58 gpm 219.5 lpm
|
  | 113.5 gpm*Optional, with additional 55.5GPM pump. 429.6 lpm
|
Tractor hitch |
Rear Type | IV/IVN
|
Rear lift (at ends) | 18631 lbs 8451 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Rear RPM | 1000/1000E
|
Electrical |
Ground | negative
|
Charging system | alternator
|
Charging amps | 320 *Two 160A alternators.
|
Batteries | 2
|
Battery volts | 12
|
References |
|
1000 Series published in 2016, by Caterpillar |
Page information |
Contact: Peter Easterlund |
Updated on October 20, 2022 |
Copyright 2022 TractorData LLC |
©2000-2022 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.