- information on all makes and models of tractors
Tractors > Challenger > MT575B

Challenger MT575B

Challenger MT575B tractor photo
2007 - 2011   MT500B Series
Row-Crop tractor
Series next:Challenger MT585B
Series back:Challenger MT565B



Manufacturer:Challenger (a part of AGCO)
Factory:Beauvais, France


Massey Ferguson 7495
Massey Ferguson 6495

Challenger MT575B Engine:

   Caterpillar 6.6L 6-cyl diesel
full engine details ...


Fuel:98 gal [370.9 L]
Hydraulic system:18.5 gal [70.0 L]
 26.4 gal [99.9 L] (CVT)

3-Point Hitch:

Rear Type:2/3
Rear lift (at 24"/610mm):15,240 lbs [6912 kg]
 14,283 lbs [6478 kg] (CVT)
Front Hitch:optional
Front lift (at ends):8,800 lbs [3991 kg]

Power Take-off (PTO):

Rear PTO:independent
Rear RPM:540/540E/1000 (1-3/8)
Front PTO:optional
Front RPM:1000 (1-3/8)

Dimensions & Tires:

Wheelbase:113.8 inches [289 cm]
Weight:15000 to 17595 pounds
Front tire:16.9R28
Rear tire:18.4R42
full dimensions and tires ...

MT575B Serial Numbers:

how to read serial numbers...


Challenger MT575B Power:

Engine (gross):185 hp [138.0 kW]
PTO (claimed):160 hp [119.3 kW]
Drawbar (tested):109.7 hp [81.8 kW]
PTO (tested):193.8 hp [144.5 kW]
power test details ...


Chassis:4x2 2WD (AutoPower only)
 4x4 MFWD 4WD (CVT or AutoPower)
Steering:hydrostatic power
Brakes:hydraulic wet disc
Trailer brakes:hydraulic optional
Cab:Cab standard with heat and air-conditioning. Optional pneumatic cab suspension and auromatic temperature control.


Type:pressure flow compensated (PFC)
Capacity:18.5 gal [70.0 L]
 26.4 gal [99.9 L] (CVT)
Pressure:2900 psi [200.0 bar]
Valves:4 to 5
Total flow:29 gpm [109.8 lpm]
 39 gpm [147.6 lpm] (optional)


Charging system:alternator
Charging amps:150


Cold-cranking amps:600

Page information:

Last update:August 10, 2018
Copyright:Copyright 2018 TractorData LLC
©2000-2018 - TractorData™. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.