Deutz-Fahr DX 7.10
| 1984 - 1989 |
DX Series | Row-Crop tractor |
|
Production |
Manufacturer | Deutz-Fahr
|
Row-Crop tractor |
Deutz-Fahr DX 7.10 Power |
Engine | 160 hp 119.3 kW
|
PTO (claimed) | 145 hp 108.1 kW
|
Mechanical |
Two- or four-wheel drive |
Differential lock | mechanical rear
|
  | OPTITRAC front
|
Power steering |
Hydraulic dry disc brakes |
Mastercab standard with air-conditioning. |
Hydraulics |
Type | open center
|
Pressure | 2538 psi 175.0 bar
|
Valves | 1 to 3
|
Pump flow | 27.3 gpm 103.3 lpm
|
Tractor hitch |
Rear Type | III
|
Rear lift (at ends) | 18739 lbs 8500 kg
|
Power Take-off (PTO) |
Rear PTO | independent
|
Rear RPM | 540/1000 (1.375)
|
Engine RPM | 540@1920 1000@1920
|
Front PTO | independent
|
Front RPM | 1000
|
Electrical |
Ground | negative
|
Charging system | alternator
|
Battery volts | 12
|
References |
 |
DX4.70-DX6.30-DX6.50-DX7.10 published in 1984, by Deutz-Fahr |
Page information |
Contact: Peter Easterlund |
Updated on August 30, 2022 |
Copyright 2022 TractorData LLC |
©2000-2022 - TractorData.com®. Notice: Every attempt is made to ensure the data listed
is accurate. However, differences between sources, incomplete listings,
errors, and data entry mistakes do occur.
Consult official
literature from the manufacturer before attempting any service or repair.