Note: the Ford-New Holland model 7710 is the same as the Ford 7710. The following data is from the 7710 listing. |
Attachment overview | |
Three loaders were available. The 777B was available for two-wheel drive tractors. The 777D could be fitted to 2WD models with ROPS. The 777F loader fit four-wheel drive tractors with ROPS or cab. |
Ford 777B Loader | |
Loader weight: | 1390 lbs 630 kg |
Height (to pin): | 124 inches 314 cm |
Clearance, dumped bucket: | 100 inches 254 cm |
Dump reach: | 44.9 inches 114 cm |
Dump angle: | 47° |
Reach at ground: | 76 inches 193 cm |
Rollback angle: | 14° |
Breakout force (lift): | 4550 lbs 2063 kg |
Lift to full height (at pin): | 2500 lbs 1134 kg |
Bucket width: | 48 inches 121 cm |
60 inches 152 cm | |
72 inches 182 cm |
Ford 777D Loader | |
Loader weight: | 1415 lbs 641 kg |
Height (to pin): | 125.2 inches 318 cm |
Clearance, dumped bucket: | 100 inches 254 cm |
Dump reach: | 33.9 inches 86 cm |
Dump angle: | 47° |
Reach at ground: | 68.1 inches 172 cm |
Rollback angle: | 14° |
Breakout force (lift): | 5500 lbs 2494 kg |
Lift to full height (at pin): | 2900 lbs 1315 kg |
Bucket width: | 48 inches 121 cm |
60 inches 152 cm | |
72 inches 182 cm |
Ford 777F Loader | |
Loader weight: | 1636 lbs 742 kg |
Height (to pin): | 120.9 inches 307 cm |
Clearance, dumped bucket: | 98 inches 248 cm |
Dump reach: | 40.2 inches 102 cm |
Dump angle: | 40° |
Reach at ground: | 74 inches 187 cm |
Rollback angle: | 13° |
Breakout force (lift): | 4800 lbs 2177 kg |
Lift to full height (at pin): | 2900 lbs 1315 kg |
Bucket width: | 48 inches 121 cm |
60 inches 152 cm | |
72 inches 182 cm |
Ford 7412 Loader | |
Loader weight: | 2550 lbs 1156 kg |
Height (to pin): | 146 inches 370 cm |
Clearance, dumped bucket: | 106 inches 269 cm |
Dump reach: | 45 inches 114 cm |
Breakout force (lift): | 4960 lbs 2249 kg |
Lift to full height (at pin): | 3000 lbs 1360 kg |
Bucket width: | 84 inches 213 cm |
96 inches 243 cm | |
103 inches 261 cm |
Page information | |
Last update: | November 1, 2009 |
Copyright: | Copyright 2021 TractorData |
Contact: | Peter@TractorData.com |