|
|
Ford 1700 - attachments
Ford listed several mowers for the 1700. Finish mowers were a 60-inch mid-mount and 59 or 72 inch rear. Rough cutting was possible with a 60-inch rotary cutter or a flail mower in 62 or 74 inch widths. Dirt work was possible with 72 and 84 inch blades and a 65-inch Gannon box scraper. Soil work was possible with 48 and 54 inch tillers. The model 725 rear trencher was available, with a cut up to 10 inches wide at three feet deep. |
| | 60" Mower deck: |
| Type: | mid-mount Ford 915
|
| Cutting width: | 60 inches [152 cm]
|
| | 60" Snow blower: |
| Type: | front-mount Ford 715
|
| Clearing width: | 60 inches [152 cm]
|
| | Loader: |
| Loader type: | Ford 770
|
| Weight: | 580 lbs [263 kg]
|
| Height (to pin): | 87 inches [220 cm]
|
| Dump clearance: | 70 inches [177 cm]
|
| Dump reach: | 30 inches [76 cm]
|
| Dump angle: | 40
|
| Reach at ground: | 61 inches [154 cm]
|
| Rollback angle: | 10
|
| Breakout force (lift): | 1,600 lbs [725 kg]
|
| Lift to full height (at pin): | 700 lbs [317 kg]
|
| Bucket width: | 48 inches [121 cm]
|
| | 60 inches [152 cm]
|
| Raise time to height: | 5.2 s
|
| Bucket dump time: | 3.1 s
|
| Lowering time: | 2.7 s
|
| | Backhoe: |
| Backhoe type: | Ford 757
|
| Bucket width: | 8 inches [20 cm]
|
| | 13 inches [33 cm]
|
| | 16 inches [40 cm]
|
| Digging depth: | 76 inches [193 cm]
|
| 2-Foot flat digging depth: | 72 inches [182 cm]
|
| Reach from pivot: | 106 inches [269 cm]
|
| Loading height: | 75 inches [190 cm]
|
| Bucket force: | 3,000 lbs [1360 kg]
|
| Dipperstick force: | 1,560 lbs [707 kg]
|
| | Backhoe: |
| Backhoe type: | Ford 758
|
| Bucket width: | 8 inches [20 cm]
|
| | 13 inches [33 cm]
|
| | 16 inches [40 cm]
|
| Digging depth: | 98 inches [248 cm]
|
| 2-Foot flat digging depth: | 96 inches [243 cm]
|
| 8-Foot flat digging depth: | 66 inches [167 cm]
|
| Reach from pivot: | 140.6 inches [357 cm]
|
| Loading height: | 85.2 inches [216 cm]
|
| Bucket force: | 3,200 lbs [1451 kg]
|
| Dipperstick force: | 2,280 lbs [1034 kg]
|
| | Page information: |
| Last update: | April 27, 2011
|
| Copyright: | Copyright 2012 TractorData
|
| Contact: | Peter@TractorData.com
|
|
