| | Production: |
| Factory: | Waterloo, Iowa, USA
|
| Manufacturer: | John Deere
|
| Series: | 50 Series
|
| Total built: | -unknown- |
| Replaced: | John Deere 8440
|
| | |
| John Deere 6-cyl diesel |
| full engine details ... | | | Capacity: |
| Fuel: | 185 gal [700.2 L]
|
| | |
| Rear Type: | 3/3N
|
| Rear lift: | 9,262 lbs [4201 kg]
|
| | |
| Rear PTO: | independent (optional)
|
| Rear RPMs: | 1000
|
| | |
| Wheelbase: | 125 inches [317 cm]
|
| Weight: | to 29150 pounds
|
| Front tire: | 18.4-38
|
| Rear tire: | 18.4-38
|
| full dimensions and tires ... | | | |
| Location: | Rear of tractor
|
1982: 1000
1983: 2000
1984: 3501
1985: 5001
1986: 5501
1987: 6001
1988: 6501
| | | Comments: |
| The John Deere model 8450 was introduced, along with the 8650 and 8850, in 1982 as replacements for the 40-series four-wheel drive tractors. Efficiency was the focus of Deere's advertisting for these tractor models. Deere promoted the ability of the 8450 to perform planting and cultivation work, the duals could be set to navigate 30-inch crop rows. The 8450 also had a full-power PTO available, along with Load-and-Depth control on the three-point hitch. |
|
| | Power: |
| Engine: | 225 hp [167.8 kW]
|
| Drawbar (claimed): | 175 hp [130.5 kW]
|
| PTO (claimed): | 185 hp [138.0 kW]
|
| Drawbar (tested): | 173.52 hp [129.4 kW]
|
| PTO (tested): | 186.98 hp [139.4 kW]
|
| power test details ... | | | Mechanical: |
| Chassis: | 4x4 Articulated 4WD
|
| Steering: | hydrostatic power
|
| Brakes: | power wet disc
|
| Cab: | Sound-Gard with air-conditioning
|
|
|
| | Hydraulics: |
| Type: | closed
|
| Capacity: | 37.5 gal [141.9 L]
|
| Total flow: | -unknown- |
| Valve flow: | 32 gpm [121.1 lpm]
|
| Steering flow: | -unknown- |
| Pressure: | -unknown- |
| Valves: | 2 to 4
|
| | Electrical: |
| Ground: | -unknown- |
| Charging system: | alternator
|
| Alternator amps: | 110
|
| | Page information: |
| Last update: | November 2, 2008
|
| Copyright: | Copyright 2008 TractorData LLC
|
| Contact: | Peter@TractorData.com
|
|
