- information on all makes and models of tractors
Tractors > Allis Chalmers > D15

Allis Chalmers D15

Allis Chalmers D15 tractor photo
1960 - 1968   D Series
Model years
Row-Crop tractor
Previous model:Allis Chalmers D14
Next model:Allis Chalmers D15 Series II
Series next:Allis Chalmers D17

The Allis-Chalmers D15 was an improved version of the D14, which it replaced in 1960. Higher power for the gas and LPG engines came from increased compression and RPMs. A diesel engine was also made available.


Manufacturer:Allis Chalmers
Factory:West Allis, Wisconsin, USA
Total built:7,169 (total)
 6,212 (gas/LP)
 957 (diesel)

Allis Chalmers D15 Engines:

   Allis Chalmers 2.4L 4-cyl gasoline
   Allis Chalmers 2.4L 4-cyl LP gas
   Allis Chalmers 2.9L 4-cyl diesel
full engine details ...


Fuel:16 gal [60.6 L] (gas/diesel)
 15.75 gal [59.6 L] (LP gas)
Hydraulic system:2.5 gal [9.5 L]

Rear Hitch:


3-Point Hitch:

Rear Type:II/I

Power Take-off (PTO):

Rear PTO:live
Rear RPM:540

Dimensions & Tires:

Wheelbase:88 inches [223 cm]
Weight:3985 to 7575 pounds
Front tire:5.50-16
Rear tire:12.4-26
full dimensions and tires ...

D15 Serial Numbers:

Location:Torque housing
1960: 1001
1961: 1900
1962: 6470
Final: 8169

how to read serial numbers...


Allis Chalmers D15 Power:

Drawbar (claimed):35.33 hp [26.3 kW]
PTO (claimed):40.0 hp [29.8 kW]
Drawbar (tested):35.33 hp [26.3 kW]
PTO (tested):40.00 hp [29.8 kW]
power test details ...


Chassis:4x2 2WD
 power optional
Brakes:expanding shoe
Cab:Open operator station.


Capacity:2.5 gal [9.5 L]
Pressure:2300 psi [158.6 bar]

Belt Pulley:

Diameter:9 inches [22 cm]
Width:6.5625 inches [16 cm]
Speed:3956 ft/min [1205.79 meters/min]




Number:1 (gas/LP)
 2 (diesel)

Page information:

Last update:March 12, 2015
Copyright:Copyright 2016 TractorData LLC
©2000-2016 - TractorData™. Notice: Every attempt is made to ensure the data listed is accurate. However, differences between sources, incomplete listings, errors, and data entry mistakes do occur. Consult official literature from the manufacturer before attempting any service or repair.