| |
General tractor information: |
| Manufacturer: | Farmall
|
| Brand: | Farmall
|
| Model: | 560
|
| Type: | Farm/Agricultural tractor
|
| Total built: | 65,982
|
| Factory: | -unknown- |
| Original price: | $5,500 (1963)
|
| |
Tractor power: |
| Drawbar (rated): | 54.8 hp [40.9 kW]
|
| Drawbar (max): | 44.83 hp [33.4 kW]
|
| PTO (rated): | 61.04 hp [45.5 kW]
|
| Plows: | 5
|
 |
 |
| |
Variants: |
| IH 560: | standard-tread
|
| Hi-Clear: | high-crop
|
| |
Engine: |
| Manufacturer: | International Harvester
|
| Model: | D282
|
| Fuel: | diesel
|
| Aspiration: | natural
|
| Type: | vertical I-head
|
| Cylinders: | 6
|
| Bore/Stroke: | 3.6875x4.3906 inches [94 x 112 mm]
|
| Displacement: | 281.3 ci [4.6 L]
|
| Compression: | 18.2:1
|
| Rated RPMs: | 1800
|
| Cooling: | liquid
|
| Coolant: | 16 qts [15.1 L]
|
| Torque: | -unknown- |
| Firing order: | 1-5-3-6-2-4
|
| Oil capacity: | 9 qts [8.5 L]
|
| |
Engine: |
| Manufacturer: | International Harvester
|
| Model: | C263
|
| Fuel: | gasoline
|
| Type: | vertical I-head
|
| Cylinders: | 6
|
| Bore/Stroke: | 3.5625x4.3906 inches [90 x 112 mm]
|
| Displacement: | 263 ci [4.3 L]
|
| Compression: | 7.2:1
|
| Rated RPMs: | 1800
|
| Cooling: | liquid
|
| Torque: | -unknown- |
| Firing order: | -unknown- |
| |
Engine: |
| Manufacturer: | International Harvester
|
| Fuel: | LP gas
|
| Type: | vertical I-head
|
| Cylinders: | 6
|
| Bore/Stroke: | 3.5625x4.3906 inches [90 x 112 mm]
|
| Displacement: | 263 ci [4.3 L]
|
| Compression: | 8.75:1
|
| Rated RPMs: | 1800
|
| Cooling: | liquid
|
| Torque: | -unknown- |
| Firing order: | -unknown- |
| |
Transmission: |
| Type: | sliding gear
|
| Forward: | 5
|
| Reverse: | 1
|
| Capacity: | 64 qts [60.6 L]
|
| Comments: | Tractor must be stopped and clutch used to shift gears.
|
| Speeds: | With 13.6-38 rear tires.
| Gear | rpm | | 1 | 2.2mph [3.5kph] | | 2 | 3.8mph [6.1kph] | | 3 | 5.4mph [8.7kph] | | 4 | 7.5mph [12.1kph] | | 5 | 16.6mph [26.7kph] | | R | 2.8mph [4.5kph] |
|
| |
Transmission: |
| Type: | Torque Amplifier
|
| Forward: | 10
|
| Reverse: | 2
|
| Capacity: | 64 qts [60.6 L]
|
| Comments: | The Torque Amplifier (TA) allows a clutchless shift-on-the-move underspeed for any gear. With the TA lever forward, the TA is disengaged and the transmission is in direct drive (DD) mode. To engage the TA, the lever should be pulled quickly and smoothly to the rear. The TA on the 560 will free-wheel, so it should be disengaged when going downhill or towing the tractor to start it.
|
| Speeds: | With 16.6-38 rear tires.
| Gear | rpm | | 1-TA | 1.5mph [2.4kph] | | 1-DD | 2.2mph [3.5kph] | | 2-TA | 2.6mph [4.2kph] | | 2-DD | 3.8mph [6.1kph] | | 3-TA | 3.6mph [5.8kph] | | 3-DD | 5.4mph [8.7kph] | | 4-TA | 5.0mph [8.0kph] | | 4-DD | 7.5mph [12.1kph] | | 5-TA | 11.2mph [18.0kph] | | 5-DD | 16.6mph [26.7kph] | | R-TA | 1.9mph [3.1kph] | | R-DD | 2.8mph [4.5kph] |
|
|
|
|
| |
Mechanical: |
| Chassis: | 4x2 2WD
|
| Steering: | manual rack-and-pinion
hydrostatic power optional
|
| Steering pump flow: | 2.5 gpm [9.5 lpm]
|
| Brakes: | independent mechanical disc
|
| |
Capacity: |
| Fuel: | 33 gal [124 L]
37 gal [140 L] LP
|
| |
|
| Rear PTO: | independent
|
| Rear speed (RPM): | 540
|
| Belt diameter: | 11 inches [27 cm]
|
| Belt width: | 7.5 inches [19 cm]
|
| Belt RPM: | -unknown- |
| Belt speed: | -unknown- |
| |
Hydraulics: |
| Type: | -unknown- |
| Capacity: | 16 gal [60 L]
|
| Total flow: | -unknown- |
| Valve flow: | 12 gpm [45.4 lpm]
17 gpm [64.3 lpm] (optional)
|
| Pressure: | -unknown- |
| Valves: | 1 to 3
|
| |
Tires: |
| Ag front: | 6.00-16
6.00-20 (Hi-Clear)
|
| Ag rear: | 12.4-38
13.6-38
|
| |
Dimensions: |
| Weight: | 6,563 lbs [2976 kg] (gas operating)
6,785 lbs [3077 kg] (diesel operating)
9,460 lbs [4291 kg] (ballasted)
|
| Wheelbase: | 96 inches [243 cm]
100 inches [254 cm] (Hi-Clear)
|
| Length: | 141 inches [358 cm]
155 inches [393 cm] (Hi-Clear)
|
| Width: | 85 inches [215 cm] (min)
(Hi-Clear inches [0 cm] min)
88 inches [223 cm] (Hi-Clear max)
107 inches [271 cm] (max)
|
| Height: | 88 inches [223 cm] (steering wheel)
107 inches [271 cm] (Hi-Clear steering wheel)
|
| Ground clearance: | -unknown- |
| |
Electrical: |
| Starter volts: | 12
|
| |
Battery: |
| Number: | 1
|
| Volts: | 12
|
| |
Nebraska Tractor Test 669: |
| Test Date: | September 18 - 25, 1958
|
| Engine: | diesel
|
| PTO (rated eng speed): | 59.48 hp [44.4 kW]
|
| PTO fuel use (rated): | 14.46 hh/g [2.8 kWh/l]
|
| Drawbar (max): | 44.38 hp [33.1 kW]
|
| |
Nebraska Tractor Test 671: |
| Test Date: | September 24 - October 6, 1958
|
| Engine: | gasoline
|
| PTO (rated eng speed): | 61.04 hp [45.5 kW]
|
| PTO fuel use (rated): | 12.65 hh/g [2.5 kWh/l]
|
| Drawbar (max): | 44.83 hp [33.4 kW]
|
| |
Nebraska Tractor Test 675: |
| Test Date: | October 8 - 20, 1958
|
| Engine: | LP gas
|
| PTO (rated eng speed): | 57.06 hp [42.5 kW]
|
| PTO fuel use (rated): | 9.73 hh/g [1.9 kWh/l]
|
| Drawbar (max): | 43.96 hp [32.8 kW]
|
| |
|
| Location: Clutch housing, right side |
| |
| 1958: 501 |
| 1959: 7341 |
| 1960: 26914 |
| 1961: 36125 |
| 1962: 47798 |
| 1963: 60278 |
| Final: 66032 |
| |
Comments: |
| |
| The Farmall 560 experienced problems due to the final drive not being strong enough to handle the power of the engine. An entirely new rear end was offered by International in mid 1959, and the company sponsored a massive replacement program. |
| |
| |
Farmall 560 links: |
| |
| |
To suggest a link, please see
these guidelines.
|
