John Deere 2520

Production years: 2006 - Tractor type: Farm/Agricultural tractor Larger: John Deere 2720 Smaller: John Deere 2320

General tractor information:
	Manufacturer:	John Deere
	Model:	2520
	Type:	Farm/Agricultural tractor
	Total built:	-unknown-
	Factory:	-unknown-
	Original price:	-unknown-
Tractor power:
	PTO (rated):	20.5 hp [15.3 kW]
Engine:
	Manufacturer:	Yanmar
	Model:	3TNV82A
	Fuel:	diesel
	Cylinders:	3
	Bore/Stroke:	3.23x3.31 inches [82 x 84 mm]
	Displacement:	81.2 ci [1.3 L]
	Compression:	19.2:1
	Rated RPMs:	2600
	Cooling:	liquid
	Coolant:	7.1 qts [6.7 L]
	Torque:	51.3 lb-ft [69.6 Nm]
	Torque RPMs:	2600
	Firing order:	-unknown-
	Oil capacity:	3.8 qts [3.6 L]
Transmission:
	Type:	hydrostatic
	Forward:	2-range
	Reverse:	2-range
	Capacity:	15.6 qts [14.8 L]
	Speeds:	Gear 2600 rpm Low 4.5mph [7.2kph] High 13mph [20.9kph] R-Low 4.5mph [7.2kph] R-High 13mph [20.9kph]
Mechanical:
	Chassis:	4x4 MFWD 4WD
	Steering:	power
	Brakes:	wet disc
	Cab:	ROPS standard
Capacity:
	Fuel:	7.1 gal [26 L]
	Coolant:	4.1 qts [3.9 L]
3-Point Hitch:
	Rear Hitch Category:	I
	Rear lift:	-unknown-
	Rear lift (at ends):	1,433 lbs [650 kg]
	Rear lift (at 24"/610mm):	1,150 lbs [521 kg]
Power Take-off (PTO):
	Rear PTO:	independent
	Rear speed (RPM):	540
	Mid PTO:	standard
	Mid speed (RPM):	2100
Hydraulics:
	Type:	open center
	Capacity:	3.9 gal [14 L]
	Total flow:	10.5 gpm [39.7 lpm]
	Valve flow:	5.0 gpm [18.9 lpm]
	Pressure:	-unknown-
	Valves:	2
Tires:
	Ag front:	-unknown-
	Ag rear:	-unknown-
	Turf front:	24x8.5-14
	Turf rear:	36x14.00-15
	Industrial front:	23x8.5-12
	Industrial rear:	14-17.5
Dimensions:
	Weight (operating):	1,865 lbs [845 kg]
	Wheelbase:	65.2 inches [165 cm]
	Length:	-unknown-
	Width:	-unknown-
	Height:	-unknown-
	Ground clearance:	12.5 inches [31 cm]
	4WD turn circle:	8.2 feet [2.5 m]
Electrical:
	Starter volts:	12
	System:	alternator
	Amps:	20
Battery:
	Number:	1
	Cold-cranking amps:	500
	Volts:	12
2520 Serial Numbers:
Location: On frame, right side, above front axle
John Deere 2520 links:
To suggest a link, please see these guidelines.

Last updated on November 1, 2009