Big Book of John Deere Tractors
|
 |
John Deere WA-17 |
| | General tractor information: |
| Distributor: | John Deere
|
| Manufacturer: | Wagner
|
| Model: | WA-17
|
| Type: | Farm/Agricultural tractor
|
| Years produced: | 1968 - 1970
|
| Total built: | 28
|
| Factory: | Portland, Oregon, USA
|
| Original price: | -unknown- |
| | Tractor power: |
| Engine: | 280 hp [208.8 kW]
|
| Drawbar (rated): | 220 hp [164.1 kW]
|
| | Engine: |
| Manufacturer: | Cummins
|
| Model: | NT855C1
|
| Fuel: | diesel
|
| Aspiration: | turbo
|
| Type: | inline
|
| Cylinders: | 6
|
| Bore/Stroke: | 5.50x6.00 inches [140 x 152 mm]
|
| Displacement: | 855 ci [14.0 L]
|
| Compression: | -unknown- |
| Rated RPMs: | 2100
|
| Cooling: | liquid
|
| Torque: | -unknown- |
| Firing order: | -unknown- |
| | Transmission: |
| Type: | sliding gear
|
| Forward: | 10
|
| Reverse: | 2
|
|
|
|
| | Mechanical: |
| Chassis: | 4x4 4WD
|
| Steering: | -unknown- |
| Steering pump flow: | 30 gpm [113.6 lpm]
|
| Brakes: | -unknown- |
| | Capacity: |
| Fuel: | 120 gal [454 L]
|
| | |
| | Hydraulics: |
| Type: | -unknown- |
| Capacity: | -unknown- |
| Total flow: | 45 gpm [170.3 lpm]
65 gpm [246.0 lpm] (optional)
|
| Valve flow: | 15 gpm [56.8 lpm]
35 gpm [132.5 lpm] (optional)
|
| Pressure: | -unknown- |
| Valves: | 2 or 3
|
| | Tires: |
| Ag front: | 28.5x26
|
| Ag rear: | 28.5x26
|
| | Dimensions: |
| Weight: | 28,300 lbs [12836 kg]
|
| Wheelbase: | 136 inches [345 cm]
|
| Length: | 257 inches [652 cm]
|
| Width: | -unknown- |
| Height: | 130 inches [330 cm]
|
| Ground clearance: | -unknown- |
| | Electrical: |
| | Comments: |
| |
| Wagner was a tractor and logging machinery firm in Oregon. Deere contracted with Wagner to build large four-wheel-drive tractors during the period after the 8020 and before the introduction of the 7020. |
| |
| | John Deere WA-17 links: |
| |
| |
To suggest a link, please see
these guidelines.
|
Last updated on May 20, 2008
|
